Accessories & 19" Racks

Home / Products		About Amtex	Contact Amtex	Newsletter	Send Catalogues
New Products	Custom Designs	Service Dept	Model Search	Employment	Appl. Notes / Links

Accessories & 19in Rack Mount Solutions.

Amtex Electronics can provide a range of mechanical packages, from totally customised solutions see( Custom Designs ) to a range of standard 19in Rack assemblies, that allow us to provide Rack Mount Solutions within a few days.

The illustrations below provide a glimpse of what we can offer......Just give us a call to discuss your application and project needs.

	19in RACK Assemblies. Our standard 19in Rack assemblies, allows us to package a variety of power supplies, in a 1U, 2U and 3U rack assemblies.....with: ►Front panel AC power switch. ►Removable cover ►Rear IEC socket for AC mains input ►Two or Four way 30A or 65A high quality Phoenix screw terminals for DC Output ►Sturdy metal unit, powder coated grey finish. ►Allows off the shelf solutions. ►Standard Rack Depths: 1U @ 315mm 2U / 3U @ 370mm
	3U x 19in RACK Assembly with meters & Distribution Breakers. As an option, our standard 19in Rack assemblies, allows to offer: ►V & A meter option ( by replacing the standard blank front panel ) ►Front panel AC power switch with Neon indicator ►Removable cover ►Distribution breakers ( customer specified ) ►Internal Dimensions: Width x 405mm x 310mm Depth.
	3U x 19in RACK Assembly - Rear View. A variety of input / output connections are available. Illustrated here: ►IEC socket for AC input supply ( optional dual AC supply ) ► 6way or 8 way terminal strip rated at 20A / 25A. ► Phoenix terminals 4 - 8 way 30-65A ►Internal Dimensions: Width x 405mm x 310mm Depth
	Open 19in TRAY In some applications, it's preferred to have units mounted in a 19in Rack assembly with the rear totally open. This may be the only way to install a power supply or dc/dc converter in a 19in Rack assembly that may be too long for our standard depth racks.
	1U x19in Rack Mount Assemblies For "Low Profile" applications we can offer standard 1U x 19in Rack mounting assemblies, with power supplies up to 1200W in a 1U Rack. We can also offer battery chargers up to 1200W with meters in the same low profile rack.
	ZX-19FPanel The lowest cost option of 19in rack mounting power supplies, available as in a 2U or 3U. Power supply and 19in Front Panel are shipped separately, or we can assemble on request. ►Suitable for use with many fully enclosed AC/DC or DC/DC power products. ► All connections are made directly on power supply existing terminals. ►Sturdy metal unit, powder coated black finish
	Output Plugs ( Data Sheet Link ) A wide range of output plugs are used on External power supplies and Plug-Packs. The attached data sheet illustrates the most commonly used output plugs in industry.
	DIN Rail Clips ( C-CL01-002 ) These high strength stainless steel clips, are designed for attachment to a wide range of electronic products, which in turn are required to be DIN Rail mounted. They are an excellent solution for Din Rail mounting AC/DC power supplies and DC/DC converters. ►Suitable for use with many fully enclosed AC/DC or DC/DC power products. ► Allows for vertical or horizontal mounting for most products. ►Normally require 2pcs per power supply.
	PS-Alarm Card. (PS-alarm Card data sheet ) The PS-Alarm Card was developed to provide an off-the-shelf solution for monitoring 12, 24 and 48vdc power supply and dc/dc converter outputs. It's very suitable for use as DC Fail Alarm. ► It provides two Alarms with relay change-over contacts, and LED for each alarm. ► Wide range adjustment for alarm voltage setting. ( 10~32V ) and ( 20~60V ) ► Easy panel mount package with screw terminals.
	DLP-PU Module. ( DLPU data sheet ) The DLPU module was designed for use with 24Vdc systems, allowing two 24V power supplies or dc/dc converters, to be connected in parallel for n+1 redundancy applications. ► Dual Input ( A & B ) ► Built-in isolation diodes. ► Two alarms relays and LED for ► Din Rail or Panel mounting possible. ► Maximum Load capacity 20A
	IP65 Enclosures. ( IP65 General Information ) In Industrial applications, there is a requirement to have DC Power Supplies to be assembled in IP65 enclosures. The IP65 General Information sheet, provides a general overview of issues that need to be addressed for optimum reliability of installations. IP65 assembly / enclosures can be provided for a wide range of our products. For AC/DC Power Supplies, DC/DC Converters, Battery Chargers and many other DC Products.

Amtex Electronics Pty Ltd : 2A Angas St, Meadowbank NSW 2114, Sydney, AUSTRALIA
A.B.N.: 35 003 420 077	Tel: +61-2-9809 5022	Fax: +61-2-9809 5077	Email: sales@amtex.com.au
AC/DC power supplies, DC/DC converters, battery charger, LED power supply are Amtex Electronics' areas of expertise

19in RACK Assemblies.

Our standard 19in Rack assemblies, allows us to package a variety of power supplies,

in a 1U, 2U and 3U rack assemblies.....with:

►Front panel AC power switch.

3U x 19in RACK Assembly with meters & Distribution Breakers.

As an option, our standard 19in Rack assemblies, allows to offer:

►Front panel AC power switch with Neon indicator

3U x 19in RACK Assembly - Rear View.

A variety of input / output connections are available. Illustrated here:

► 6way or 8 way terminal strip rated at 20A / 25A.

Open 19in TRAY

In some applications, it's preferred to have units mounted in a 19in Rack assembly with the rear totally open.

This may be the only way to install a power supply or dc/dc converter in a 19in Rack assembly that may be too long for our standard depth racks.

1U x19in Rack Mount Assemblies

For "Low Profile" applications we can offer standard 1U x 19in Rack mounting assemblies, with power supplies up to 1200W in a 1U Rack.

We can also offer battery chargers up to 1200W with meters in the same low profile rack.

ZX-19FPanel

The lowest cost option of 19in rack mounting power supplies, available as in a 2U or 3U.

Power supply and 19in Front Panel are shipped separately, or we can assemble on request.

Output Plugs ( Data Sheet Link )

A wide range of output plugs are used on External power supplies and Plug-Packs. The attached data sheet illustrates the most commonly used output plugs in industry.

DIN Rail Clips ( C-CL01-002 )

These high strength stainless steel clips, are designed for attachment to a wide range of electronic products, which in turn are required to be DIN Rail mounted.

They are an excellent solution for Din Rail mounting AC/DC power supplies and DC/DC converters.

PS-Alarm Card. (PS-alarm Card data sheet )

The PS-Alarm Card was developed to provide an off-the-shelf solution for monitoring 12, 24 and 48vdc power supply and dc/dc converter outputs.

It's very suitable for use as DC Fail Alarm.

DLP-PU Module. ( DLPU data sheet )

The DLPU module was designed for use with 24Vdc systems, allowing two 24V power supplies or dc/dc converters, to be connected in parallel for n+1 redundancy applications.

► Dual Input ( A & B )

► Two alarms relays and LED for

IP65 Enclosures. ( IP65 General Information )

In Industrial applications, there is a requirement to have DC Power Supplies to be assembled in IP65 enclosures.

The IP65 General Information sheet, provides a general overview of issues that need to be addressed for optimum reliability of installations.

IP65 assembly / enclosures can be provided for a wide range of our products. For AC/DC Power Supplies, DC/DC Converters, Battery Chargers and many other DC Products.

AC/DC power supplies, DC/DC converters, battery charger, LED power supply are Amtex Electronics' areas of expertise